Keurig Brewer Cleaner Includes 14 oz. Descaling Solution, Compatible Classic/1.0 & 2.0 K-Cup Pod Coffee Makers

good buy cleans my espresso machine great

My Keurig is a bit older (6 years or so) and doesn’t have the water reservoir, so I never really paid attention to the cleanliness of the interior. Until recently.. I noticed quite a build-up from our hard water so I thought I’d try the Keurig descaling solution first. First, you have to peel the entire label almost completely off to get to the instructions. The instructions are detailed though, and different instructions are provided for different brewer models. From the moment I poured the first run into the reservoir I noticed it start to work. It was bubbling and stains were starting to disappear. I ran the cleaning cycles as recommended, and then, instead of 3 runs through with clear water, I did 7 or 8. I noticed flakes of this and that continuing to appear in the mug I used, so I kept running clear water until the end result was clear water. After than many clear water cycles there was no residual taste of the solution at all. My only complaint is that 2/3 of the bottle has now been used. To descale again I would need another bottle. The 1/3 that’s left isn’t enough for a full cleaning, and it’s kind of expensive to use that much each time.

I think it works. Not sure why a review is necessary

Keurig Descaling solution is the best for cleaning the scale off the inside of your brewer and keeping it running in top shape. I have a Keurig 2.0 brewer and this keeps it clean and fresh for my beverages. Regular use of this product will keep calcium deposits to a minimum and is essential for the maintenance of the heating element.

The procedure I use is as follows:

This applies to K-Cup, Vue, Rivo, and Keurig 2.0 brewers.
1. Empty the water reservoir and remove the filter (if applicable). Turn the brewer off by holding the power button.

2. Put the whole bottle in the reservoir.

3. Turn the brewer on and put a large mug on the drip plate.

4. Run the solution through the brewer and discard the liquid in the sink until the brewer displays “add water”.

5. Leave the brewer on and allow the solution to sit in the lines for 30 minutes.

6. Remove the water reservoir and thoroughly rinse it out in the sink. Then fill it with fresh water and run three tanks of fresh water through the machine. This ensures that all of the solution is washed out of the lines. Then all you have to do is replace the filter if you removed it earlier and brew your favorite K-cup.

There is a section on the directions on the bottle that talks about a “foam” coming out of the brewer in the case of heavily scaled machines, but I have not personally experienced this. If your Keurig is older and you have never descaled it you may see this but I normally run the descaling solution through my machine about once every 3-4 months. You will be happy with the performance of your brewer after doing this and it can make an old machine run like brand new!! I highly recommend it!

Sa fonctionne bien

Peut ère bon, mais le vinaigre est bon aussi pour nettoyer une cafetière, mais ça change rien pour la durée de vie de la cafetière.

Great product, very useful